Explanation of each symbol of the furnace’s name::
С – resistance – the type of heating;
Н – chamber – a constructive feature;
О – oxidative – workspace environment;
6 – the width of the working space in decimeters;
15 – the length of the working space in decimeters;
6 – the height of the working space in decimeters;
2 – the nominal temperature in °C, is conditionally reduced by 100 times.
Description
Electric furnace СНО-6.15.6/2
Electric furnaces are designed for drying and hardening of various materials, low tempering and annealing.
Electric furnace TermoPro®. Advantages over analogues:
Heaters
Three sides heating. It gives good result of even distribution of heat field over the volume of working chamber.
Heating elements located behind the protective baffles avoid local overheating.
Design
It possible to design blind or pass-through furnace (determined by the customer). The chamber could be in stainless steel or structural steel design (basic version).
Possibipty to install a divider in the chamber in any location. This offers the unique possibipty to turn off the heating of part of the furnace volume when curing small parts. If a second control unit is installed, two independent heating zones can be obtained in one housing.
Quick-release panels on the perimeter of the furnace case provide easy repair, quick heater replacement.
Furnace includes sleeve for connection to ventilation system.
Optionally, the furnace can be equipped with shelves, containers or shelves for setting the charge.
Control unit
Electronic control unit comes with a microprocessor-based thermostat to completely epminate overheating of the heating chamber.
Explosion-proof dedign
It is possible to produce the furnace in an explosion-proof version for drying electric motors, etc.
Warranty
18 months warranty on the control unit.
50 months warranty on TermoPro series temperature controllers.
Specifications
| No. p / p | Name of technical specification | Unit | Value |
|---|---|---|---|
| 1 | Installed capacity total | kW | 15 |
| 2 | Supply voltage | V | 380 |
| 3 | AC frequency | Hz | 50 |
| 4 | Number of phases | 3 | |
| 5 | Automatic temperature control range | °С | 200 |
| 6 | Temperature stability in steady state thermal conditions* at the measurement point, without charge, not worse | °С | ± 5 |
| 7 | Workspace environment | air | |
| 8 | Heating-up time of the electric furnace to the nominal temperature without charge, less than | min | 30 |
| 9 | Dimensions of the working chamber, not less than: width x length x height | mm | 600x1500x600 |
| 10 | Overall dimensions, less than: width x length x height | mm | 1370x1950x1700 |
| 11 | Weight, less than | kg | 500 |
Product line
| No. p / p | Name | Т nom, °С | Dimensions of the working chamber, width x length x height, mm | Working chamber material | Power, kW |
| 1. | СНО-6.6.6/2 | 200 | 600 х 600 х 600 | steel/stainless | 6 |
| 2. | СНО-10.8.2/2 | 200 | 1000 х 800 х 200 | steel/stainless | 6 |
| 3. | СНО-6.15.6/2 | 200 | 600 х 1500 х 600 | steel/stainless | 15 |
| 4. | СНО-35.15.15/2 | 200 | 3500 х 1500 х 1500 | steel/stainless | 61 |
| 5. | СНО-10.12.12/3 | 300 | 1000 х 1200 х 1200 | steel/stainless | 26 |
| 6. | СНО-8,5.10.8,5/4 | 400 | 850 х 1000 х 850 | steel/stainless | 18 |
| 7. | СНО-8.10.12/4 | 400 | 800 х 1000 х 1200 | steel/stainless | 18 |
| 8. | СНО-9.7.10/4 | 400 | 900 х700 х 1000 | steel/stainless | 13,5 |
| 9. | СНО-10.10.10/4 | 400 | 1000 х 1000 х 1000 | steel/stainless | 20 |
| 10. | СНО-15.15.12/4 | 400 | 1500 х 1500 х 1200 | steel/stainless | 57 |
Under the order, we produce furnaces of any size according to your specifications.
Warranty
The manufacturer provides a warranty for the product for 12 months. Warranty on the control unit – 18 months, on the thermoregulator series TermoPro® – 50 months.
